Ringlite™ 19" Cinema

The Ringlite™ 19" Cinema produces such a beautiful quality of light, you'll never want to use a conventional source again. Three separate, adjustable circuits put ultimate control at your fingertips. Use just part or all of the unit – whatever the scenario calls for. With its thin, low profile, Ringlite is an unobtrusive yet versatile source that benefits any shooting situation. Use it on or off camera.

Ringlite™ Mini

This smaller version of the original Ringlite™ system comes in both 3200°K and 5600°K. A more versatile and economical model that measure 10.5" in diameter with a 5" lens opening and weights only 3.5 lbs.

This Ringlite-Mini system can be powered with its supplied 110/220VAC adapter or with battery power in a range from 9 - 30VDC via a 10ft. XLR power cable. Specific cable connectors allow for on-camera power adaptation. This lamp draws about 40 watts/3.5 amps @ 12VDC. An on-board switching/dimming control allows the camera operator to make the required adjustments. Three circuits determine the illuminated area of the "Ringlite-Mini" – top, center, or bottom sections. Remote dimming is also an option this Ringlite system.

There are optional 16-piece filters and/or diffusions available. Mounting system include an adjustable base plate system. Optional quick release system also available which allows for filter boxes, step down lens rings and lens support systems for both film and video cameras.

Track Rail Extension / Case

This latest innovation from Litepanels, allows the popular 1x1 fixtures to be arrayed into a single 4x4 lighting source. Without yokes, 16 – 1x1's slide into four columns of a fixed frame.

A dedicated power supply with eight (8) integrated, quick-connect power/data cables mounts to the back of the 4x4 frame to provide singular control over power and dimming of all fixtures of the 4x4.

The combined unit draws only 720 watts of power yet produces 4000watts of light with an array of "flood" fixtures and 8000watts with an array of "spot" fixtures. A 25ft. power cord with 3-prong Edison plug is attached to the power supply housing. Current draw is a total of 6.5amps @ 110VAC.

The 4x4 aluminum frame is supported via a steel yoke with a standard 1 1/8 in. Junior Pin. The frame and yoke, as well as, the power supply are finished with a black powder coat paint. The assembled fixture (4x4 frame, fixtures, power supply housing) weighs less than 90lbs.